5 BASIC STEPS TO CREATE A GLASS PAINTING

GLASS PAINTING

This interesting and unusual painting technique is also known as : 

-Reverse painting on glass 

-Glass painting 

-Reverse painting 

-Painting on glass 

-Reverse glass painting 

-Glass art 


Step 1. GLASS AS A PAINTING SUPPORT 


Both glasses (or plassified glass) are non-absorbent painting supports that do not allow the paint to easily adhere to them, apart from through the paint's own drying process. 

For this reason, the outline of a subject painted on glass needs to be simplified when applied to an extremely smooth surface. 

Working the paint or changing outlines without smudging the surrounding areas of undried paint requires patience, as well as a certain amount of skill. 

Simplifying a subject does not necessarily detract from the end result after the painting is completed. The final result often has an appearance similar to that of naive art, in which composition and form and a certain number of other details are simplified. Many artists will find that such simplification can actually be very appealing. 

With patience and the development of their skills, while using this painting technique, artists will find that applying and mastering the use of glass as support will become easier as time progresses. 

Step 2. PREPARING THE PAINTING SUPPORT 


Choose a piece of clear glass (or plastified glass) in the dimensions you would like to work with and check carefully to make sure the surface is neither scratched nor flawed. 

It is worthwhile remembering that a flaw in the glass itself will often detract from the finished appearance of a painting and maybe impossible to remove after the completion of your artwork. 

The sheet of glass that is to become your artwork constitutes the following: 

(1) The ‘painting side’ - or the side you will be painting on. 

(2) The ‘viewing side’ - or the side you will be looking at (or through) as you progress with your work, and after it has been completed. 

To render the cutting edges of the glass safe, take a length of sellotape that will correspond to the length of one edge. Apply it carefully along that length (ideally so that it is folded equally over each side of the glass). Repeat this procedure for the other 3 glass edges. The edge of the sellotape will also help mark the outer limits of your artwork. 

Clean the surface of the glass thoroughly with a glass-cleaning product. Use paper towelling or any cleaning material that will not leave dust or threads on your painting surface. 

Store the glass where it will be safe. If placed between sheets of newspaper it will be protected from scratches and dust. 

Step 3. MATERIALS REQUIRED FOR REVERSE PAINTING Glass 


Choose clear unflawed glass (or plastified glass) in the shape and size you wish to use. It is advised to choose smaller sizes, to begin with. 

Paints 

It is necessary to use paint that will adhere properly to the surface of the glass. Oil-based paints or acrylics are often used for this reason. There are also opaque and transparent ceramic artist colours that have been specially manufactured for use on a non-absorbant surface. Metallic oil-based colours (eg. gold, silver or copper) can also be interesting to work with. 

Paintbrushes 


Choose a selection of small or medium-sized paintbrushes with fine, flat and pointed tips. Larger brushes can be used for working on a larger scale. 

A penholder 


It can be an advantage to use interchangeable nibs suitable for creating both thick and thin outlines. 

A painting palette 

Or something similar to mix your paint on. 

A palette knife 

(Optional) for mixing paint. 

Artists paint cleaner or thinner 

Used for cleaning or sometimes for thinning. 


Fine linseed oil or drying agent 

For mixing with oil paints to help speed up the drying process 

Paper towelling 

Or some clean rags 

A mirror 

(Optional) It can be used to check the progress of your painting while you are continuing to work. Place the mirror in a position where it will reflect your artwork from its viewing side. In this way, progress can be observed without needing to turn the glass artwork around. 

Cello tape 

Or a similar average-width sticking tape 

An easel 

(Optional) to prop your work on 

A glass-cleaning product 

Step 4. CREATING OUTLINES 


Art products in liquid form that are suitable for creating outlines on glass may be readily available in some countries. Oil-based paint, water-based acrylic and ceramic paint can also be used for this purpose. In order to create fine lines, these paints must sometimes be thinned down in order to use with a pen nib or similar line-drawing tool. 

To prevent lines from being effaced too easily use a paint that is oil-based for creating the outlines of your subject if the paint you will be applying over the top of it (after it has properly dried) is water-based. 

Reverse this procedure if your outlines are created with water-based paint. 

Always use a liquid paint product that will provide the best adhesion possible to a glass surface. 

Due to pen nibs clogging relatively easily attention must be paid to cleaning the nibs regularly. 

Method 1. 

If you have a steady hand you can use a freehand method for applying outlines directly onto the surface of the glass. 

Method 2. 

Use an original subject for your painting (e.g. a drawing) and place this under the glass, then copy it onto the glass surface. 

Method 3. 

Place a layer of carbon paper on top of the glass then place your drawing on top of the carbon paper and with a pointed object trace the subject onto the glass. 


Method 4. 

A tracing table can be used for creating outlines. This is a table with a sheet of clear glass inserted into the top and an electric light source situated beneath it. For those who frequently need to trace their work, a tracing table can be very practical and useful. 

Method 5. 

You can omit outlines altogether. 

Most artists have a preference for how to work when creating an artwork. Once you have decided whether to use a table easel, a standing easel or prefer placing your artwork either slightly propped up on a table or flat down, you will find it necessary to view your artwork regularly from its observation side in order to see its progress. Some artists simply take the glass in their hands and turn it around to look at it directly from its observation side. Others prefer to use a mirror placed directly opposite their working area so that they can observe their progress while they paint. 

Mixing and blending 

If you are blending colours, always do so on your palette before applying them to the glass. If colours are not well blended or mixed the result will be a streaky appearance in the paint on the observation side of the glass. 

Avoiding smudges 

It is important to watch out for smudges of paint, or particles of dirt or dust that may accidentally be transferred onto unpainted areas of your artwork as you are progressing. Unless removed these may appear as flaws that will show when viewing the artwork from its observation side. If they are also inadvertently covered with a layer of paint removing them afterwards may become very messy and difficult. When lifting off any smudges always be careful not to damage outlines or other areas of paint you have already applied. 


Step 5. APPLYING THE PAINT 

Once the outlines of your subject have thoroughly dried you can begin to apply paint to fill in the remainder of your artwork. Keep in mind that applying layer on layer of paint on a non-absorbant surface needs to be done carefully in order to avoid one layer lifting off the preceding one. For this reason, ample drying time should be allowed between layers. 

Painting the subject of a reverse painting on glass requires a different approach to that of a normal painting method. In the case of a reverse painting on glass it is necessary to paint the subject or subjects situated in the foreground first, and those in the background afterwards. You will therefore normally begin by painting more detailed objects first, e.g. eyes, faces, figures or other foreground objects. This also means that if you wish to sign your artwork you will need to begin by applying your signature. 

For practical reasons, it is best to begin working from the centre of the artwork outwards in order to avoid your hands having to touch the glass surface more than necessary. To watch your progress from the viewing side of the glass, carefully turn your artwork around from time to time, or use a mirror as indicated in Step 3. 

Keep in mind: 

- That your artwork will be observed from the opposite side to the one you are painting on. 
- That you are painting in reverse, therefore foregrounds precede backgrounds. 

When applying the reverse painting method it is best to think carefully about the sequence in which your painting will develop before beginning to apply your paint. This will help create the methodical approach that is necessary for this particularly interesting and also intricate painting technique.

Post a Comment

Previous Post Next Post