How to Do Glass Painting





How to Do Glass Painting


All you want to do glass portray is a little creativeness and staying power alongside with, of course, sure matters like a easy piece of glass (size 8X8" is ample for the first timers), glass liners, paints, paintbrushes, nail polish remover, and a smooth piece of cloth. You do not have to trouble your self in amassing these items. They are all blanketed in the Painting Kits, that are so without difficulty accessible in the market these days. Even earlier than shopping for a glass portray kit, you will have to figure out what shades are you going to use for making your glass painting. If you are a first timer then you ought to choose for water-based coloration and get the novices kit. Water-based paints, as in contrast to oil primarily based paints, are simpler to handle.

Basic Steps for Making a Glass Painting


1. After getting the piece of glass and the portray kit, smooth the glass so as to get a easy surface.

2. If you are now not going to oven treatment your completed portray then you want incredibly tough surface. Firing in a kiln can assist oil paints dry and adhere higher in any other case paints have a tendency to peel or chip off. This can be countered by using roughening up the floor a little with moist or dry sandpaper. Roughing the floor in this manner will assist the paint adhere higher and closing longer.

3. Select a sample which has clear outlines with minimal feasible curves and pointed corners.

4. Trace the sample on a piece of paper which is precisely the measurement of the glass piece. The sample need to be drawn precisely at the middle with at least 1 or 1-1/2 inches margin on all sides.

5. Keep the glass on the patterned piece of paper aligning them perfectly.

6. Make outlines of the sample on the glass with the assist of glass liner. Use black glass liner for most clarity. These borders assist in protecting the moist shades inside them and keep away from spilling of the paints.

7. While doing all these, be cautious now not to mess up the pattern. If, however, it happens, swab the smudged phase with cotton-wool dipped into nail polish remover and wipe away with piece of cloth.

8. Leave the sample to dry up. It might also take somewhere from two to 5 hours to get absolutely dried. It can additionally be blow dried for quickening the process.

9. Now use the colorations to fill in the sample with uni-directional strokes. Avoid taking too a good deal of paint or spilling it. Any nook or phase that is now not painted can be viewed from the reverse facet by means of lifting up the glass. Be careful, now not to keep the glass vertically to avoid dripping off the colors.

10. If any bubbles are made in the colorations whilst painting, then pierce them with needle or a pin. They can additionally be gently brushed toward the outlines bringing them out of the borers and then wiping them away with nail polish remover.

11. Avoid making use of two coats of paint in any element of the pattern.

12. Allow the portray to dry for at least 24 hours.

13. After the portray has dried, vicinity it in a bloodless oven. Set the oven to one hundred sixty deg C (325F). When temperature reaches 160C, time it for forty minutes. Switch off the oven and enable it to cool. Once the oven is cold, cast off the Glass Painting.

14. Alternatively, you can let the portray air dry solely by means of now not klin firing it.

15. You can use beads, glitter, and sequins into the moist paint earlier than it dries for redecorating the painting.

Not solely paintings, this method, with little changes, can be used to make a painted stain glass window or mirror. You can even make glass portray greeting card and use it on any one of a kind occasion. 

Post a Comment

Previous Post Next Post